Aquaclear Pool Service

Description

CIRCULATE: The water needs to be circulated every day. The amount of time will vary depending on your particular equipment and the bather load for that day. Start running the pump 6 hours per day and increase as needed if the water is cloudy. 2.) FILTER: The filter needs to be kept clean. This is done by either physically cleaning it by hand or backwashing. The interval will vary depending on your particular equipment. Monitor the pressure valve if you have one. Most manufactures recommend cleaning the filter after the pressure gauge goes up 8 pounds from a clean filter reading. Start with weekly cleanings and adjust as needed. 3.) CLEAN: The surfaces (sides and bottom) need to be kept free from dirt and debris. You will have to vacuum and or brush the surfaces periodically to maintain it. Most pools should be brushed at least once per week. The skimmer needs to be checked for debris, every day during windy or stormy periods. 4.) FILL: Check the water level of the Pool/Spa and Fill it to the recommended level (half way up the skimmer opening) each day. 5.) TEST: Test the sanitizer (chlorine or bromine) and pH every day.

Fact sheet

Products & services

Similar companies nearby