Black Goose Chimney Sweep

Website Links

Description

We’ve installed and serviced thousands of stoves since 1989. We became a “one-stop” company both out of necessity and concern for our customers. It seemed that so many “retailers” were really just “order takers” and didn’t know much about their products, its capabilities, or limitations. At least as important they didn’t know much about chimneys, vents, or fireplaces. Most were not even offering site inspections prior to a sale to determine their customer’s needs and expectations. Never mind the plain feasibility of a job! Too many times I had the unpleasant task of telling a homeowner that the stove they’d chosen wouldn’t fit, or wouldn’t meet their needs, or simply could not be installed in the way they had envisioned. These things should never happen. At Black Goose we offer personal service, expert guidance and professional installation. On this site you will find links to the manufacturers we are proud to represent. Fuel economy, freedom from utility companies, unlimited heat, cozy atmosphere, environmental soundness….any or all of these are good reasons to install a wood burning stove. Properly installed and maintained, a solid fuel heater can provide years of safe, reliable warmth for your home. Choosing a Stove New or Used? Occasionally one can find a bargain in a used stove. Sometimes people move and must leave one behind or are buying a newer stove and have to move “old reliable” out for room; however, in my experience used stoves are more often problems rather than bargains. Usually they are unlisted or untested which means it is best to keep the maximum distance from combustibles. Listed stoves (UL or ETLM or other laboratory) will have a nameplate giving clearance requirements and special installation instructions. These are generally more reliable and predictable stoves if they are in good condition and have not been altered. Old homemade stoves (1970’s – 1980’s) were usually patterned after a recognizable brand, i.e. Fisher type, etc., and may look a lot like their parent brand but because they are made individually without testing and listing, they can behave erratically. They may put out good heat, but they also may have hot spots, insufficient combustion, ill fitting doors, improperly sized vent and air inlets, etc. If you are seriously considering a used appliance, look closely – inspect for damage, look for defects. We cannot install home made stoves. What about those old pot belly or sheet metal stoves? Basically, they usually work but they are terribly inefficient. The initial savings in stove cost is quickly lost in fuel economy and frequent tending. You will probably have a more positive experience by not buying a stove which must have constant attention. Also whether you cut and split your own wood or buy it, you might as well get the most heat for your effort. A certified sweep will shy away from installing anything other than a tested, listed appliance, vented according to NFPA-211 or other applicable codes. We don’t sell or install EPA exempt or unlisted, untested appliances. New Stoves All stoves made after June 1, 1992 must meet EPA \phase II Emissions Standards.

Products & services

Similar companies nearby