Grimm Heating & Air Conditioning

Grimm Heating & Air Conditioning

  • 320 S Main
  • Morton, Illinois
  • 61550

Description

Commercial and residential heating and air conditioning specialists for central Illinois, including Tazewell, Peoria, Woodford and surrounding counties. Geothermal heating and air conditioning, contrary to popular belief, has been around for more than 35 years. It was only until energy costs started soaring that it came to the forefront of the media and people looking at lowering their utility bills. What is a "geothermal" system? It takes advantage of the Earth's ability to store vast amounts of heat in the soil ("geo" means earth and "thermal" refers to heat). This heat energy is maintained at a constant temperature (50 °F to 70 °F depending on latitude) in the soil and near-surface rocks. In Illinois, the soil maintains a 50 °F temperature beginning approximately four feet down, well past the winter frost line. Geothermal heating systems, also called ground-source heat pumps, "capture" this steady supply of heat energy and "move" it from the Earth and through a home or building. Basically, once installed, a home or building owner will use much less energy, save money each month, and reduce the amount of pollution produced by fossil fuel systems. How does this work? A heat pump is a mechanical device that transfers heat from one source to another. Ground-source units pull heat from the earth and transfer it to homes or buildings. Heat pumps (despite their name) can provide both heating and cooling. The cooling process is simply the reverse of the heating process: heat is taken out of a building and returned to the Earth. Typical ground-source heat pumps transfer heat using a network of tubes, called "closed loops." Basically, the loops are filled with either water, refrigerant or an anti-freeze solution. They run through the ground in the vicinity of a building and the liquid absorbs the Earth's heat energy. Then, this warmed liquid is pumped back through the system into the building. This process provides heat to the building space. Once the fluid passes through the building and transfers its energy, it flows through the loop system back to the Earth and the process repeats itself. In the summertime, these systems "reverse" into cooling mode. Technically, the system does not "run backwards." Instead, a series of valves enables the system to switch the "hot" side and the "cold" side. The heat from the building is transferred to the liquid in the loop and this liquid is pumped back into the ground. When the ground source heat pump is in cooling mode, it usually has an excess of warmed liquid in the system. This liquid can heat water for the building and basically eliminate the use of the hot water heater during the summer months Want to lower your utility bills? Check out our residential geothermal heating and air conditioning system Grimm Heating and Air Conditioning takes special pride in the invitation to work in your new home. Whether it's a small service matter or the installation of a new system, Grimm's goes the extra mile to ensure your satisfaction and comfort.

Products & services

Similar companies nearby