Republic Storage Systems Company, Inc.

Website Links

Description

Republic Storage Systems traces its roots back to 1886, when John and Wilson Berger of Canton, Ohio began forming lengths of metal conductor pipe in their basement workshop. In 1921, Berger Manufacturing Company merged with United Furnace Company and created the trade name Berloy which quickly became known nationwide for steel furniture, storage products, lockers and shelving. The company fostered the creation of Republic Steel Corporation in 1930 and built essential components for ships and planes throughout the war years.

Shelf Reinforcing Angles Angles shall be 1" x 1" made from 11 gauge, hot-rolled steel and are used to reinforce open flange clip shelves. Reinforcing angles not installed at factory. Must be attached by means of bolts and nuts in the field. Reinforcing angles can be used with angle sway braces and label holders. Standard sizes 24", 30", 36", 42" and 48". Reinforcing angles are shipped bundled. Shelf Reinforcing Hat Channel - Open Flange Clip Shelf Only Reinforcing hat channel shall be made of 12 gauge hot rolled steel.

Doors for tiered lockers shall have diamond shaped perforations 3/4" wide by 1 1/2" high to provide free air flow while leaving sufficient metal for rigidity and strength. Doors for box lockers 4, 5 and 6 openings high are perforated for free airflow using small diamond perforations 7/16" wide by 15/16" high. Doors shall be punched for the number plate mounting on the top face of the door. 2.3.6 LATCHING: Latching shall be achieved by securing an 11 gauge frame hook to the locker side frame located midway up on the door.

...count on Republic Storage Systems to deliver! For over 100 years we have led the industry in quality, customer service and value. From the time your order is placed to the time it ships, you can expect the products and service that your business demands.

2.3.6 PRE-LOCKING DEVICE: All "tiered" lockers, except lockers with a turn handle, shall be equipped with a positive automatic pre-locking device whereby the locker may be locked while door is open and then closed without unlocking and without damaging locking mechanism. 2.3.7 LATCHING: Latching shall be a one-piece, pre-lubricated spring steel latch, completely contained within the lock bar under tension to provide rattle-free operation. The lock bar shall be of pre-coated, double-channel steel construction.

Fact sheet

Company contacts

Companies nearby