Description
Display the RF Spectrum from 2 to 2,150MHz, and act as a continuous-tuning AM/FM receiver. *Measure the amplitude and frequency of RFI generated by your computer or electrical appliances, and instantly evaluate the results of filtering or shielding. ( Photo supplied by Marty, KG6FOQ ) *Examine Satellite TV signals and their sub-carriers. (Curious about those "secret" signals ?) *Identify modulation modes such as AM, FM, SSB, FSK, PCM etc. *Sweep an area for illegal "bugs". *Signal trace transmitters and receivers, check "gain-per-stage" when building or troubleshooting and test for harmonic or intermodulation distortion. *Check your transmitter output for "spurs". *Receive "on-carrier" or "sub-carrier" ATV sound. *See if the band is "open" at a glance, or find a quiet spot on the band. *Monitor ALL the local repeaters SIMULTANEOUSLY! *Make field strength measurements. *Orient and tune antennas (and antenna tuners) for maximum results across a band of frequencies. *Tune antenna duplexers or diplexers, make VSWR measurements, measure insertion loss and tune RF filters. These are only a few of the applications for the New Science Workshop Spectrum Analyzer/Receiver. With "RF-Vision" you will have a new monitoring mode, with rapid signal detection, modulation analysis and band condition and activity information constantly available at your finger tips! Through it ’s many applications, this new instrument provides information and operating techniques not available in any other way.