Description
Q: What type of metal will SHARKHIDE work on? A: SHARKHIDE can be applied to Aluminum, Polished Aluminum, Diamond Plate, Copper, Brass, Steel, Stainless Steel, or any other metal you want to prevent from staining and discoloring. Q: Can you see SHARKHIDE once it's applied? A: SHARKHIDE is virtually invisible on any metal surface other than a high polished surface. On a high polish finish, SHARKHIDE when wiped on, can sometimes leave a slight rainbow sheen, like on a soap bubble. This will some what lessen with a second coat and it also tends to diminish with time. Q: Will SHARKHIDE work on painted surfaces? A: Yes, SHARKHIDE can be applied to dull painted surfaces that are beginning to get chalky and oxidized. SHARKHIDE will prevent the chalky finish from returning as well as bring back a rich shiny finish. Q: Can SHARKHIDE be used on Fiberglass? A: Yes, SHARKHIDE restores the appearance of old faded Gel Coat as well as sealing it off so it won't take on a permanent water line. Q: Will Sunlight cause SHARKHIDE to yellow? A: NO! SHARKHIDE will not EVER yellow or discolor. Q: What will SHARKHIDE protect against? A: SHARKHIDE will protect your surfaces from water (fresh, salt, brackish), acid rain, salt spray, humidity, alkaline, soot, and all road deicers (known at this time). Q: Will SHARKHIDE keep Moss and Algae from growing on my boat hull? A: NO!!! SHARKHIDE is a metal protectant, NOT an "Anti Fouling" bottom paint. Q: How long will the average application last? A: On things like Motorcycles, Street Rods, Aircraft and other things that see limited fair weather use, it's not uncommon to get 6 or more years of protection between coats. On heavily used things like Big rigs, Dump trailers, Fire and Rescue equipment, you may need to re coat every 1 to 4 years. On boats that are kept on the trailer, or on a lift, it's not uncommon to get 3 to 5 years of protection. If you leave your boat in the slip all season long, from the water line down, it may last a month, or it may last a couple of years. There are just too many variables such as water conditions and content, as well as severity of marine growth etc. But from the water line up, you can expect the same protection as any other boat. Q: How do I apply SHARKHIDE? A: SHARKHIDE can be applied by wipe, spray, brush, or dip, depending on the surface texture and desired finish. Generally speaking, for a smooth finish, the preferred method is to wipe it on. Q: What type of cloth should I use to wipe SHARKHIDE on? A: A WHITE COTTON BABY DIAPER is the best cloth for the job. Q: Can I use other items to wipe on SHARKHIDE? A: Since we've not tested all other types of applicators, we can only tell you to avoid the following things. Lint, textures (such as Teri Cloth, or Micro Fibers), dyes, detergent residue, dry cleaning chemicals, sponges or any thing else that will leave anything behind in the SHARKHIDE clear coat. Since a Cotton Baby Diaper has none of these properties, why not stick to that? Q: Can I use a spray bottle or garden sprayer to apply? A: No, they will not sufficiently atomize the SHARKHIDE and it will create runs.